Stopping Open DNS - ZyXEL P660R-D1: Difference between revisions

← Older edit

Stopping Open DNS - ZyXEL P660R-D1 (view source)

Revision as of 23:59, 17 August 2018

158 bytes added , 17 August 2018

→‎See also: clean up

Reedy

editor

699

edits

Revision as of 11:10, 13 January 2014 (view source) AA-Andrew (talk \| contribs) m (→‎Changing this via Telnet) ← Older edit		Latest revision as of 23:59, 17 August 2018 (view source) Reedy (talk \| contribs) (→‎See also: clean up)
(6 intermediate revisions by one other user not shown)
[[File:P660rd1.png\|link=Router - ZyXEL P660R-D1]] The factory setting for this router on older firmware is for DNS to be open on the WAN IP as well as the LAN IP. This will be changed when configured by AAISP, but if it is configured from new, or reset, then WAN side DNS may need to be disabled. ~~This can be done from the web interface and '''setting DNS Access Status to LAN'''. Go to:~~ > Advanced - Remote MGMT - DNS - LAN▼ =Changing DNS Settings via the Web Interface= This can be done from the web interface and '''setting DNS Access Status to LAN'''. Go to: ▲ > Advanced - Remote MGMT - DNS ~~- LAN~~ Then re-test from the Control Pages: https://clueless.aa.net.uk/dnsresolvers.cgi [[File:Zyxeld1-opendns-3.png]] The LAN/WAN here are relating to the LAN/WAN IP addresses, not the LAN/WAN interfaces. ==Changing ~~this~~DNS Settings via Telnet==▼ ==The DNS checker is saying DNS is still open==▼ If you have publicly routed IP addresses on the LAN side of the router then you may wish to disable the resolver completely instead of restricting it to the LAN IP, as the LAN IPs will be still be accessible from the outside world.▼ ==What is the IP address of the router?==▼ Most routers supplied by AAISP will have a sticker or card on the base of the router which will have the IP address. ▼ ==What is the admin username and password?==▼ Most routers supplied by AAISP will have a sticker or card on the base of the router which will have the password. On the ZyXEL the username is admin.▼ ==I am Unable to get to the web interface?==▼ Sometimes the webserver on the router stops working, try turning the router off and on again.▼ ▲==Changing this via Telnet== If you still can't access the router web pages, then you can do this via telnet by running the following commands: sys save Note: Allowed access type: 0: ALL, 1: None, 2:LAN IP only, 3:WAN IP only =FAQ= ▲==The DNS checker is saying DNS is still open== ▲If you have publicly routed IP addresses on the LAN side of the router then you may wish to disable the resolver completely instead of restricting it to the LAN IP, as the LAN IPs will be still be accessible from the outside world. ▲==What is the IP address of the router?== ▲Most routers supplied by AAISP will have a sticker or card on the base of the router which will have the IP address. ▲==What is the admin username and password?== ▲Most routers supplied by AAISP will have a sticker or card on the base of the router which will have the password. On the ZyXEL the username is admin. ▲==I am Unable to get to the web interface?== ▲Sometimes the webserver on the router stops working, try turning the router off and on again. ==Does this apply to other routers?== This also applies to the P-660HW-T1 v2 Router, and probably other ZyXELs ==~~Also~~See ~~see:~~also== [[:Category:Open DNS Resolvers]] [[~~Router_~~Router -~~_ZyXEL_P660R~~ ZyXEL P660R-D1]] [[Category:Open DNS Resolvers]] [[Category:~~Router~~AA Routers]] [[Category:3rd Party Routers]]