12,299
edits
This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!
CrazyTeeka (talk | contribs) mNo edit summary |
m (→Overview) |
||
(14 intermediate revisions by 5 users not shown) | |||
<indicator name="Front">[[File:
=Overview=
The FireBrick 2500/2700
As there are 4 ports are we restricted to only bonding up to 3 ADSL/FTTC lines? No.
The switch would be set up for 4 (or more) separate VLANs on the appropriate ports, and on the FireBrick, the <ppp .../> config would have VLAN="n".
=VLAN Switch Config=
Instructions on using a ZyXEL GS1900-8 switch: [[ZyXEL GS1900-8]]
Here are some notes on setting up a HP ProCurve 1810G-8:▼
The HP ProCurve 1810G-8 (J9449A) is a nice little 8 port managed switch. No fans and similar in size to a FireBrick.
==Overview
The FireBrick will have a single WAN port, which will plug in to the HP Switch. The ADSL/FTTC modems will plug in to the HP Switch too.
This will then, with VLANs, enable the FireBrick to use up to 7 ADSL/FTTC modems.
*Default IP is "192.168.2.10"
*Default
*Default password: 1234
==Save Config
To make things a little easier, here is a saved config: [[File:FBVLANconfig1810G.bin.zip]]. It is the default config (default IP and password), but with VLANs as follows:
*Port 1 - VLAN 101, for ADSL line 1
However it only takes a few minutes to set up the VLANs manually as follows:
==Basic Settings
*Set your computer to an IP in the same subnet as the switch,
*Plug computer in to a port,
*Log in to http://192.168.2.10 with a blank password
*Maybe set the system description details
*Enable HTTPS (Security - Secure Connection) generate certificate and apply
==Create VLANs
We will set ports 1-4 to be VLANs 101, 102, 103, 104. We'll use port 8 for plugging in to the FireBrick, and use port 7 for our admin.
*Create 4 VLANs (VLANS - VLAN Configuration)
[[File:1810G-8-VLANSList.png|border]]
==Configure ports for VLAN tagging
*Under VLANs - Participation Tagging:
**set VLAN 101 to be U on port 1 and T on port 8. E on rest
[[File:1810G-8-VLAN101.png|border|500px]]
[[File:1810G-8-VLAN1.png|border|500px]]
On some switches you may need to set the PVID accordingly - ie Port 1 = PVID 101, Port 2 = PVID 102 etc... This was needed on a PoE variant of a switch, but not on the non-PoE variant.
*SAVE CONFIG - otherwise you will learn the hard way
==IP Address
In order to access the Switch, we'll need to setup
Alternately, we can use a public /30. This will involve a new /30 allocation on Clueless, routed to all the ADSL/FTTC lines, and on the FireBrick a subnet on the WAN interface.
Set the gateway to the FireBrick, then the switch can access things like time server, syslog server etc...
[[Category:Bonding]]▼
[[Category:FireBrick|Bonding]]
▲[[Category:Bonding Configuration]]
|
edits