editor
699
edits
This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!
No edit summary |
(Fix syntax) |
||
(11 intermediate revisions by 3 users not shown) | |||
<indicator name="FireBrick Tunnels">[[File:FBimgtunnel.svg|link=:Category:FireBrick Tunnels|30px|Back up to the Tunnels Category]]</indicator>
[[File:2700-small.png|link=:Category:FireBrick]]
To add a
<syntaxhighlight lang="xml">
<route ip="::/0" gateway="81.187.81.6" comment="IPv6
</syntaxhighlight>
Here
*ra="true"
*ra-mtu="1480" (1472 if MTU was 1492 before,
*ra-dns
*and add an IPv6 address from your block to the ip= element.
Once saved, machines on your LAN should be given IPv6 addresses, and they will use the FireBrick as their IPv6 gateway, which in turn will use the tunnel endpoint.
You
<syntaxhighlight lang="xml">
<rule name="IPv6 tunnel" source-interface="WAN" target-interface="SELF" source-ip="81.187.81.6" protocol="41"/>
</syntaxhighlight>
It's also really easy to set up an IPv6 tunnel from http://tunnelbroker.net if you are using a FB2700 on an ISP which doesn't already support IPv6. If the details for your tunnel on your control panel say your server IPv4 address is 192.0.2.26 and your client IPv6 is 2001:DB8:ABCD:123E::2 then you would put the following in your config:
<syntaxhighlight lang="xml">
</syntaxhighlight>
Then create a LAN subnet entry with your
[[Category:FireBrick
|