editor
699
edits
Mikrotik L2TP Server: Difference between revisions
→Add a PPP secret: fix redlink
(Created page with "L2TP handover can be done with Mikrotik routers. If you have multiple SIMs, one thing to bear in mind is to use the same hostname on the Control Pages. This will then put the...") |
(→Add a PPP secret: fix redlink) |
||
| (10 intermediate revisions by 2 users not shown) | |||
|
__NOTOC__<indicator name="L2TP">[[File:Menu-L2TP-Relay.svg|link=:Category:L2TP Handover|30px|Back up to the L2TP Handover page]]</indicator>
L2TP handover can be done with Mikrotik routers.
In the log, indicating that the tunnel for the first SIM has been dropped.
=Configuration=
The following was taken from: https://www.aa-asterisk.org.uk/Data_sim_L2TP_server_for_ROS
==Enable L2TP server on a router board==
<syntaxhighlight lang=bash>
/interface l2tp-server server
set authentication=pap,chap default-profile=default enabled=yes max-mru=1460 max-mtu=1460 mrru=disabled
</syntaxhighlight>
==Set up an L2TP server==
[[Category:Mobile L2TP Handover]]▼
<syntaxhighlight lang=bash>
/interface l2tp-server
add comment="L2TP Server" disabled=no name="DATA SIM" user=<this is the number you will see in L2TP debugging, you can also get it from the log on Control Pages related to your data sim>
</syntaxhighlight>
==Add a PPP secret==
<syntaxhighlight lang=bash>
/ppp secret
add caller-id="" disabled=no limit-bytes-in=0 limit-bytes-out=0 local-address=<IP address on the rb ie 10.10.10.10>\
name=<this is the number you will see in L2TP debugging> \
password=password profile=default remote-address=<your choice of IP here ie 10.10.10.11> routes="" service=l2tp
</syntaxhighlight>
The "name" is a number in the format of 4477xxxxxxxx.
You will need to watch the L2TP PPP debug for this, or get it from [[:Category:Control Pages|clueless]].
| |||