editor
471
edits
This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!
m ('ifconfig' is undocumented (and quite useful)) |
('iptables' is an unlisted command. 'ip6tables' is harder to get to.) |
||
=CLI Tips=
The ZyXEL VMG1312 has a web interface and a Command Line Interface (CLI). The CLI can be reached by telnet or ssh. Usually the CLI is not needed to be used as
==== Show the list of commands:
?
There are extra commands that are not shown in that list, e.g. ifconfig, top, and ps.
The firewall can be examined/controlled using the unlisted 'iptables' command (known to Linux users):
> iptables -nvL
Chain INPUT (policy ACCEPT 74 packets, 16446 bytes)
pkts bytes target prot opt in out source destination
10946 1726K LAN_ONLY_INPUT all -- * * 0.0.0.0/0 0.0.0.0/0
10946 1726K DOS_INPUT all -- * * 0.0.0.0/0 0.0.0.0/0
10946 1726K ACL_INPUT all -- * * 0.0.0.0/0 0.0.0.0/0
10946 1726K FW_GENERAL_INPUT all -- * * 0.0.0.0/0 0.0.0.0/0
4836 524K SERVICE_CONTROL all -- * * 0.0.0.0/0 0.0.0.0/0
289 75333 OTHER_INPUT all -- * * 0.0.0.0/0 0.0.0.0/0
215 58887 DROP all -- !br+ * 0.0.0.0/0 0.0.0.0/0
...
But frustratingly the 'ip6tables' command is not available for examining/controlling the IPv6 firewall.
The 'ip6tables' command is available from the shell prompt, but AAISP's config means getting a shell prompt is a little complicated.
==== Show running processes and CPU/memory information: ====
|