TalkTalk Wholesale Line Tests: Difference between revisions

From AAISP Support Site
mNo edit summary
Line 29: Line 29:
==GetSpeedTestResults==
==GetSpeedTestResults==
This will display the historical speed tests for the line when using TalkTalk's speed tester at [http://internet-speedtest.net internet-speedtest.net]. When you use this tester be sure to put your number in the box at the end without spaces.
This will display the historical speed tests for the line when using TalkTalk's speed tester at [http://internet-speedtest.net internet-speedtest.net]. When you use this tester be sure to put your number in the box at the end without spaces.

[[File:Speedtest-button.png]]

The speedtest button on the control pages will take you to the test page.


Example result:
Example result:

Revision as of 14:58, 17 October 2013

On TalkTalk Wholesale lines there are various line tests that can be run. Not all exchanges have the TAM module installed so for a few lines theses tests may not run successfully.

TTW-tests.png


Get Sync Status

This will return the current sync status of the line

Example result:

TTW-Sync-Result.png

TAM

The TAM test runs testing on the copper circuit. This task takes about 3 minutes to run.

After Running the test, go back can select to view the results.

Example result:

TTW-TAM-Result.png

GetLineData

This will retrieve a history of the line, up to 7 days at most.

Example result:

TT-tests-GetLineData.png

GetSpeedTestResults

This will display the historical speed tests for the line when using TalkTalk's speed tester at internet-speedtest.net. When you use this tester be sure to put your number in the box at the end without spaces.

Speedtest-button.png

The speedtest button on the control pages will take you to the test page.

Example result:

Clueless-GetSpeedTestResults.png

The speed figures are in Kb/s...