252
edits
This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!
m (clean up, typos fixed: it it → it is, eg → e.g.) |
m (→Interleaving, Error Correction and Delay: Caps, typo) |
||
(8 intermediate revisions by 3 users not shown) | |||
With TalkTalk Wholesale ADSL circuits we (and customers) have full control over the line profile. By default we disable DLM, and are able to set the profile manually.
On the control pages for the Line we have the profiles selection:
[[File:Tt-profile-list.png|none|frame|Profile options on the Control Pages]]
To change the profile, select the one you like, and then press Profile to make the change. It will just take a few seconds to apply, and the line will resync.
=Understanding the Profile Names=
[[File:Tt-profile.png|link=
*We have a table of all the available profiles, [[TalkTalk Wholesale Line Profiles List|See here]]
==Annex M line profiles==
AnnexM profiles are available to customers with the 'Premium' option on their service.
Annex M line profiles are of the form:
MXYYY_SNR_DDD_UUU:MInpN
==SNR==
SNR is a measure of signal strength and as such is measured in Decibels (dB). The values in use on the
*6 dB
*9 dB
*15 dB
==3dB==
3 dB is now supported! As of November 2015 customers can request a 3 dB profile. The process is a little long winded, but once a Support staff member picks up the task 3 dB can be applied within a few minutes. Do contact us.
==Interleaving, Error Correction and Delay==
Packets of data that are transferred across a DSL line are split
If one block of a larger packet is lost due to line interference, the packet can be recreated using the remaining blocks that were received; data blocks reserve some space for data which can salvage a partially damaged block. This is known as
The
The buffer sizes available on the TalkTalk network are:
*Off (
*8ms
*16ms
[[Category:TalkTalk Wholesale]]
[[Category:
|
edits