B10D Control Page Options

Back up to the VMG1312-B10D Page
From AAISP Support Site
Revision as of 11:02, 4 July 2017 by Aa-jamie (talk | contribs) (note firewall needs reboot to apply)


The settings that are configurable via the Control Pages are as follows:

  • WAN and Bridge options
  • Firewall
    • Enabled
    • Disabled
    • Auto (the router's default, which is Enabled)
  • DHCP Allocation
    • None
    • All
    • or chose a number of IPs that can be allocated
  • WiFi SSID
  • WiFi Password
  • WAN Admin allowances
    • Block all
    • Only Allow AAISP (Default)
    • Allow HTTPS
    • Allow All (Not recommended)

Note that changes to the Firewall on the B10D require the change to be saved, sent to the router, and once applied a reboot command needs to be sent to the router before the change to the firewall is applied.


Click to Access the Control Pages

Accessing This Feature

Access is via the Control Pages as follows:

  1. Log in to the Control Pages with your xxx@a login
  2. Click on the line relating to the router
  3. Click the 'Router Settings' button