3
edits
B10D Factory Reset: Difference between revisions
m
→Reset to AAISP Base Settings
Silverphish (talk | contribs) |
|||
| (One intermediate revision by one other user not shown) | |||
|
To reset the router to the AAISP base settings, follow these steps:
#Unplug everything from the router except the power and phone line
#Switch router on, wait for it to boot up
#With a paperclip, pen, etc., hold in the reset button
ROM-D cleaned.
</syntaxhighlight>
You may need to obtain the supervisor password, which is specific for each device and not known by AAISP.
At this point you can reset the router for this to be applied. The router will then boot up in its original factory settings without any of the AAISP configuration settings. You can reset the router by holding in the reset button for 5 seconds.
| |||