Cisco IPv6 Tunnel Config: Difference between revisions

Cisco IPv6 Tunnel Config (view source)

95 bytes added , 24 February 2015

m

no edit summary

12,274

edits

Revision as of 16:37, 24 November 2010 (view source) Tdgsandf (talk \| contribs) (Created page with "<code> ipv6 unicast-routing ipv6 cef ! enable IPv6 routing ! interface Tunnel6 no ip address ipv6 address 2001:8B0:XXXX:YYYY::/64 eui-64 ! XXXX is 2001:8B0:XXXX::/48 is your AA...")		Latest revision as of 13:13, 24 February 2015 (view source) AA-Andrew (talk \| contribs) mNo edit summary
(5 intermediate revisions by 2 users not shown)
<~~code~~pre> ipv6 unicast-routing ipv6 cef ! ipv6 route ::/0 Tunnel6 ! make the tunnel our IPv6 default route ! ipv6 access-list internet_ipv6_in deny ipv6 any any log ! </~~code~~pre> Notes on the above: # Replace placeholders with the appropriate address portions for your allocated /48 and internal network # I've included a very basic firewall configuration. I've used the "reflect" technology which may not be available in all IOS versions [[Category:3rd Party Routers\|Cisco]] [[Category:IPv6]]