editor
471
edits
DGA0122 Disable SSH: Difference between revisions
m
Reference OpenWrt
mNo edit summary |
m (Reference OpenWrt) |
||
| (5 intermediate revisions by 2 users not shown) | |||
|
[[Category:Technicolor_DGA4134]]
This probably applies to most Technicolor routers of the same era.
ssh is enabled from the LAN, and can be accessed using the engineer user and the admin password.
The CLI is fairly unfriendly, there is no manual. The firmware is based on OpenWrt, and the '''get''' and '''set''' commands work like as in that firmware's UCI. N.B. If you choose to play with the CLI, the '''rtfd''' command will reset the router to factory default setting, without any warning or Y/N prompt.
[[File:Technicolor-ssh-disable.png|thumb|ssh disable command]]▼
ssh can be disabled if you want, you can do this via
== Web method ==
Login to the router using the ''engineer'' username and admin password. Select the ''System Info'' tile and the ''Configuration'' tab. Turn ''Local SSH'' on or off.
With Local SSH turned off, when you try to ssh, you'll get:
ssh: connect to host 192.168.1.1 port 22: Connection refused
To revert the change, use the above steps to turn Local SSH back on.
== SSH method ==
ssh in to the router and paste the following which will disable the access:
set InternetGatewayDevice.Services.X_000E50_AccessManagement.SSH.ServerAccess.1.Enable 0
The command will run, and should report no error. type exit to exit from the ssh session. (see screenshot)
Then reboot the router.
| |||