49
edits
FireBrick 2700 Configuration run-through: Difference between revisions
FireBrick 2700 Configuration run-through (view source)
Revision as of 21:34, 15 February 2011
, 15 February 2011→Native IPv6
|
Now, the clients are instructed to do DHCPv6, and this FB will respond with the addresses listed.
Future releases may support the Search List options, too.
Tested with: Win 7, Win Vista
Note:
It's not always clear on the win boxes whether this worked.
On a Vista box, the command 'ipconfig /all' will show both IPv4 and IPv6 DNS servers configured.
Win7 seems lame, and only reports IPv4.
To show the IPv6 DNS servers, you need to use the command 'netsh interface ipv6 show dns'.
= Next Steps, Bonding a Second Line =
| |||