Router - VyOS: Difference between revisions
(Added LAN configuration commands and NAT) |
m (Grammer fixes) |
||
[https://www.vyos.net/ VyOS] is an Open Source router operating system built on top of Debian Linux.
Rather than having to configure lots of different software packages, everything is
Documentation for VyOS is available here: https://vyos.readthedocs.io/en/latest/
This section describes how to configure the LAN interface (eth0) with an IP address and advertise addresses using SLAAC and DHCP.
First, configure addresses on the interface.
We are going to use the first /64 subnet of your IPv6 allocation for the LAN subnet.
<code>xxxx</code> needs to be replaced with your AAISP IPv6 allocation.
Finally,
<pre>
* The second network interface (eth1) is connected to a VDSL modem for PPPoE
* IPv4 NAT is configured for LAN devices to access the Internet
* Passwords (***) and placeholders (xxxx) need to be replaced with your
* No firewall is configured in this example
|