TalkTalk Wholesale Line Tests
On TalkTalk Wholesale lines there are various line tests that can be run. Not all exchanges have the TAM module installed so for a few lines theses tests may not run successfully.
Get Sync Status
This will return the current sync status of the line
Example result:
OperStatus:
This is the Operational Status of the Port in the exchange.
- Activating - Line not in sync. This does not mean a modem/router is plugged in, it just means it's waiting for a modem to sync up
- UP - Line is in sync
TAM
The TAM test runs testing on the copper circuit. This task takes about 3 minutes to run.
After Running the test, go back can select to view the results.
Example result:
GetLineData
This will retrieve a history of the line, up to 7 days at most.
Example result:
GetSpeedTestResults
This will display the historical speed tests for the line when using TalkTalk's speed tester at internet-speedtest.net. When you use this tester be sure to put your number in the box at the end without spaces. TalkTalk would like you to run the test at least 3 times, at various times of the day.
The speedtest button on the control pages will take you to the test page.
Example result:
The speed figures are in Kb/s...