editor
699
edits
This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!
mNo edit summary |
(clean up) |
||
(31 intermediate revisions by 2 users not shown) | |||
!Area !!Setting !!Note !!Date added
|-
|
|-
|
|-
|
|-
|
|-
|
|-
|
|-
|
|-
| Wireless || Configure WiFi for 20 MHz || Instead of 40 MHz see [[VMG1312: WiFi Tips]] || 2015-02-01
|-
| Wireless || Configure WiFi for AES only|| This disables legacy/insecure TKIP see [[VMG1312: WiFi Tips]] || 2015-06-16
|-
| Firewall || Configure Firewall on/off || Settings on Control Pages, Default=Enabled || 2015-02-01
|-
| TR-069 || Configure TR-069 ||
|-
| Log || Configure Local logging ||
|-
| Firewall ||
|-
|
|-
|
|-
|
|-
| Firewall || Disable 'DoS Protection Blocking' ||
|-
|
|-
|
|-
|
|-
| Firewall || Change Remote Management Options || Further Settings on Control Pages. Default is to only allow the LAN and the AAISP offices access. || 2015-02-01
|-
| QoS || Change QoS || Set to give upstream priority based on 'Packet Length' See: [[VMG1312: QoS]] || 2015-02-01
|-
| Firewall || Change 'Deny Ping Response' to Disable, ||
|-
| QoS || Disable the default QoS Classes || See: [[VMG1312: QoS]] || 2015-02-01
|-
|
|}
*[[VMG1312: Static Routes|Static routes]] are currently not configured. (Only applicable if you have multiple public IP blocks and need them routed to a secondary router. These can be configured manually though.
This list may not be exhaustive, and may change over time.
==WAN Configuration==
As mentioned above, the WAN side of the router is configured depending on the Service provided and the settings on the Control Pages.
{| class="wikitable"
!Service
!Bridge
!WAN port
!Note: WAN
!Note: LAN
!Note: WiFi
!Other notes
|----
!colspan="7"|Routing Configurations - Connecting to phone line
|----
!ADSL
|No
|DSL
|Plugs in to phone line
|Customer LAN
|Customer LAN
|MTU 1492
|----
!FTTC wires only
|No
|DSL
|Plugs in to phone line
|Customer LAN
|Customer LAN
|MTU 1492, WAN VLAN 802.1q=101
|----
!colspan="7"|Routing Configurations - Connecting to another modem
|----
!FTTC engineer install (not available for new installations)
|No
|Port 4
|plugs in to Openreach modem (no longer supplied)
|Customer LAN
|Customer LAN
|1492 MTU, WAN VLAN 802.1q=101. QoS will not know the uplink speed automatically, The rate can be set under Network Setting - Broadband - #3 edit
|----
!FTTP
|No
|Port 4
|plugs in to Openreach modem
|Customer LAN
|Customer LAN
|1492 MTU. QoS will not know the uplink speed automatically, The rate can be set under Network Setting - Broadband - #3 edit
|----
!colspan="7"|Bridge Configurations
|----
!FTTC wires only with Customer own PPPoE router
|Yes
|DSL
|Plugs in to phone line
|Customer PPPoE router
|Usually Disabled
|ZyXEL becomes a bridging modem. MTU 1492. WAN VLAN 802.1q=101
|----
!ADSL with Customer own PPPoE router
|Yes
|DSL
|Plugs in to phone line
|Customer PPPoE router
|Usually Disabled
|ZyXEL becomes a bridging modem. MTU 1492
|----
|}
=Making Changes=
If you make changes to your configuration then you may want to back it up. See: [[VMG1312: Backup Configuration]]
[[Category:
|