editor
699
edits
This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!
(clean up) |
|||
(26 intermediate revisions by 2 users not shown) | |||
|-
| Broadband || Configure WAN interface || Further Settings on Control Pages: ADSL/FTTC, Bridge or WAN on port 4 (FTTP) || 2015-02-01
|-▼
| Broadband || Configure WAN VLAN 802.1q=101 || Only for the VDSL WAN interface. || 2015-02-01
|-
| Broadband || Configure PPP || Settings as per the service || 2015-02-01
|-
| Home Network || Configure LAN subnet || If line has a block of public IPs use them, else default is 192.168.1.1 || 2015-02-01
|-▼
| Home Network || Configure LAN subnet || If router set for bridge mode, leave IP as 192.168.1.1 || 2015-06-19
|-
| Wireless || Configure WiFi || Further Settings on Control Pages: SSID, Password or disable WiFi || 2015-02-01
|-
| Wireless || Configure WiFi for
|-
| Wireless || Configure WiFi for AES only|| This disables legacy/insecure TKIP see [[VMG1312: WiFi Tips]] || 2015-06-16
| Log || Configure Local logging || Logs: System, PPPoE, XDSL, Internet, Attack, Account. || 2015-05-29
|-
| Firewall ||
|-
| Home Network || Disable NAT || If customer has a public IP block || 2015-02-01
| Maintenance || Change 'admin' password || Setting on Control Pages || 2015-02-01
|-
| Firewall || Change Remote Management Options || Further Settings on Control Pages. Default is to only allow the LAN and the AAISP offices access. || 2015-02-01
|-
| QoS || Change QoS || Set to give upstream priority based on 'Packet Length' See: [[VMG1312: QoS]] || 2015-02-01
| QoS || Disable the default QoS Classes || See: [[VMG1312: QoS]] || 2015-02-01
|-
| Maintenance || Remove
|}
*[[VMG1312: Static Routes|Static routes]] are currently not configured. (Only applicable if you have multiple public IP blocks and need them routed to a secondary router. These can be configured manually though.
This list may not be exhaustive, and may change over time.
!Note: WAN
!Note: LAN
!Note: WiFi
!Other notes
|----
!colspan="7"|Routing Configurations - Connecting to phone line
!FTTP▼
|----
!ADSL▼
|No
|DSL
|
|Customer LAN
|Customer LAN
|MTU 1492
|----
!FTTC wires only▼
▲!ADSL
|No
|DSL
|Customer LAN
|Customer LAN
|MTU 1492, WAN VLAN 802.1q=101
|----
!colspan="7"|Routing Configurations - Connecting to another modem
|----
!FTTC engineer install (not available for new installations)
|No
|Port 4
|plugs in to
|Customer LAN
|Customer LAN
|1492 MTU, WAN VLAN 802.1q=101. QoS will not know the uplink speed automatically, The rate can be set under Network Setting - Broadband - #3 edit
|----
▲!FTTP
▲!FTTC wires only
|No
|Port 4
|
|Customer LAN
|Customer LAN
|1492 MTU. QoS will not know the uplink speed automatically, The rate can be set under Network Setting - Broadband - #3 edit
|----
!colspan="7"|Bridge Configurations
▲|
▲|
|----
!FTTC wires only with Customer own PPPoE router
|Yes
|DSL
|Plugs in to phone line
|Customer PPPoE router
|Usually Disabled
|ZyXEL becomes a bridging modem. MTU 1492. WAN VLAN 802.1q=101
|----
!ADSL with Customer own PPPoE router
|Yes
|DSL
|Plugs in to phone line
|Customer PPPoE router
|Usually Disabled
|ZyXEL becomes a bridging modem. MTU 1492
|----
|}
=Making Changes=
If you make changes to your configuration then you may want to back it up. See: [[VMG1312: Backup Configuration]]
[[Category:
|