VMG1312-B10A: AAISP Configuration: Difference between revisions

← Older edit

VMG1312-B10A: AAISP Configuration (view source)

Revision as of 00:22, 18 August 2018

1,024 bytes added , 18 August 2018

clean up

Reedy

editor

699

edits

Revision as of 14:32, 19 June 2015 (view source) AA-Andrew (talk \| contribs) mNo edit summary ← Older edit		Latest revision as of 00:22, 18 August 2018 (view source) Reedy (talk \| contribs) (clean up)
(21 intermediate revisions by 2 users not shown)
\|- \| Broadband \|\| Configure WAN interface \|\| Further Settings on Control Pages: ADSL/FTTC, Bridge or WAN on port 4 (FTTP) \|\| 2015-02-01 \|-▼ \| Broadband \|\| Configure WAN VLAN 802.1q=101 \|\| Only for the VDSL WAN interface. \|\| 2015-02-01 \|- \| Broadband \|\| Configure PPP \|\| Settings as per the service \|\| 2015-02-01 \| Wireless \|\| Configure WiFi \|\| Further Settings on Control Pages: SSID, Password or disable WiFi \|\| 2015-02-01 \|- \| Wireless \|\| Configure WiFi for ~~20Mhz~~20 MHz \|\| Instead of ~~40Mhz~~40 MHz see [[VMG1312: WiFi Tips]] \|\| 2015-02-01 \|- \| Wireless \|\| Configure WiFi for AES only\|\| This disables legacy/insecure TKIP see [[VMG1312: WiFi Tips]] \|\| 2015-06-16 \| Maintenance \|\| Change 'admin' password \|\| Setting on Control Pages \|\| 2015-02-01 \|- \| Firewall \|\| Change Remote Management Options \|\| Further Settings on Control Pages. Default is to only allow the LAN and the AAISP offices access. \|\| 2015-02-01 \|- \| QoS \|\| Change QoS \|\| Set to give upstream priority based on 'Packet Length' See: [[VMG1312: QoS]] \|\| 2015-02-01 \|} *[[VMG1312: Static Routes\|Static routes]] are currently not configured. (Only applicable if you have multiple public IP blocks and need them routed to a secondary router. These can be configured manually though. This list may not be exhaustive, and may change over time. !Note: LAN !Note: WiFi !Other notes \|---- !colspan="7"\|Routing Configurations - Connecting to phone line !FTTP▼ \|---- !ADSL▼ \|No \|DSL \|~~plugs~~Plugs in to ORphone ~~modem~~line \|Customer LAN \|Customer LAN \|MTU 1492 \|---- !FTTC wires only▼ ▲!ADSL \|No \|DSL \|Customer LAN \|Customer LAN \|MTU 1492, WAN VLAN 802.1q=101 \|---- !colspan="7"\|Routing Configurations - Connecting to another modem ~~!FTTC engineer install~~ \|---- !FTTC engineer install (not available for new installations) \|No \|Port 4 \|plugs in to OROpenreach modem (no longer supplied) \|Customer LAN \|Customer LAN \|1492 MTU, WAN VLAN 802.1q=101. QoS will not know the uplink speed automatically, The rate can be set under Network Setting - Broadband - #3 edit \|---- ▲!FTTP ▲!FTTC wires only \|No \|Port 4 ~~\|DSL~~ \|~~Plugs~~plugs in to ~~phone~~Openreach ~~line~~modem \|Customer LAN \|Customer LAN \|1492 MTU. QoS will not know the uplink speed automatically, The rate can be set under Network Setting - Broadband - #3 edit \|---- !colspan="7"\|Bridge Configurations ▲\| \| \| \| \| \| \|---- !FTTC wires only with Customer own PPPoE router \|Plugs in to phone line \|Customer PPPoE router \|Usually Disabled \|ZyXEL becomes a bridging modem. MTU 1492. WAN VLAN 802.1q=101 \|---- !ADSL with Customer own PPPoE router \|Plugs in to phone line \|Customer PPPoE router \|Usually Disabled \|ZyXEL becomes a bridging modem. MTU 1492 \|---- \|} =Making Changes= If you make changes to your configuration then you may want to back it up. See: [[VMG1312: Backup Configuration]] [[Category:~~ZyXEL_VMG1312~~ZyXEL VMG1312-B10A\|AAISP Configuration]]