General Router Settings: Difference between revisions

From AAISP Support Site
m (VPI/VCI incorrect (wrong way round))
Line 20: Line 20:
More Details on [http://www.aaisp.net.uk/kb-broadband-router.html www.aaisp.net.uk/kb-broadband-router.html]
More Details on [http://www.aaisp.net.uk/kb-broadband-router.html www.aaisp.net.uk/kb-broadband-router.html]


= Basic BE Settings =
= Basic BE PPPoE Settings =
This is for Be lines installed before December 2010, as lines after this will be PPPoA, and will have the same settings as a BT line, as above.


[[Image:BE-Zyxel.png|thumb|150px|BE-Zyxel.png]]
[[Image:BE-Zyxel.png|thumb|150px|BE-Zyxel.png]]

Revision as of 14:32, 25 January 2011

Related Pages on the A&A Website:


These are the basic settings for configuring ADSL modems/routers for a connection to AAISP using a BT or a BE line. (more info in your Information PDF Pack (available from sales if required).

Basic BT Settings

BT-Zyxel.png
  • Username (as given, eg xx@a.1)
  • Password (as given, can be changed on the Control Pages)
  • VPI = 0
  • VCI = 38
  • MTU = 1500
  • PPPoA
  • Mux = VC Mux
  • Line Type = Auto
  • WAN IP = 0.0.0.0 (Your fixed WAN IP will be assigned upon login)
  • DNS: 217.169.20.20 217.169.20.21 (2001:8b0::2020 and 2001:8b0::2021 for IPv6)

More Details on www.aaisp.net.uk/kb-broadband-router.html

Basic BE PPPoE Settings

This is for Be lines installed before December 2010, as lines after this will be PPPoA, and will have the same settings as a BT line, as above.

BE-Zyxel.png
  • Username (as given, eg yy@a.1)
  • Password (as given, can be changed on the Control Pages)
  • VPI = 0
  • VCI = 101
  • MTU = 1492
  • PPPoE
  • Mux = LLC
  • Line Type = Auto
  • WAN IP = 0.0.0.0 (Your fixed WAN IP will be assigned upon login)
  • DNS: 217.169.20.20 217.169.20.21 (2001:8b0::2020 and 2001:8b0::2021 for IPv6)


More Details on www.aaisp.net.uk/kb-broadband-bebt.html