Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

B10B Factory Reset: Difference between revisions

m
"save_default clean" needs to be run from zycli
m (Hashcat takes about 9.5 hours to crack a SHA-512 hash)
m ("save_default clean" needs to be run from zycli)
(One intermediate revision by the same user not shown)
==Reset to the ZyXEL Factory Settings==
 
To erase the default AAISP settings, the 'ROM-D' file needs to be cleared, this is done via the CLI (Telnet or SSH) using the supervisor user (see above) and then issuing the <syntaxhighlight inline enclose="none" lang="bash">zycli save_default clean</syntaxhighlight> command.
 
Here is an example:
VMG3925-B10B
Login: supervisor
Password: [your adminsupervisor password]
> zycli save_default clean
ROM-D cleaned.
</syntaxhighlight>
 
At this point you canshould reset the router for this to be applied - by holding in the reset button for 5 seconds. The router will then boot up in its original factory settings without any of the AAISP configuration settings. You can reset the router by holding in the reset button for 5 seconds.
 
In this state, the router has ZyXEL's default IP address, username and password.
editor
466

edits