B10D Own Configuration: Difference between revisions

Back up to the VMG1312-B10D settings Page
From AAISP Support Site
(Created page with "__NOTOC__<indicator name="Front">link=:Category:B10D Settings & Configuration|30px|Back up to the VMG1312-B10D settings Page</indicator> Category:B10D...")
 
Line 7: Line 7:
#whenever it is reset (to the AAISP base config)
#whenever it is reset (to the AAISP base config)
#When the 'Send Configuration' buttons on the Control Pages are used
#When the 'Send Configuration' buttons on the Control Pages are used

This configuration is done via an industry standard called [https://en.wikipedia.org/wiki/TR-069 TR-061]

Revision as of 20:19, 30 June 2017


Overview

In most cases the B10D router is configured by our systems - this happens:

  1. when the router first logs in
  2. whenever it is reset (to the AAISP base config)
  3. When the 'Send Configuration' buttons on the Control Pages are used

This configuration is done via an industry standard called TR-061