Category:FireBrick IPsec Road Warrior

From AAISP Support Site
Revision as of 11:21, 25 August 2015 by AA-Andrew (talk | contribs)


The FireBrick manual goes into some detail on configuring IPsec. These pages below contain specific examples for a simple scenario where you have one or more clients devices - iPhones iPads, Android phones/tablets or Windows machines, and a FireBrick in your home or office, and you would like to VPN (using IPsec) to the FireBrick and have an IP address on your LAN.

First, create certificates and the FireBrick config, then look at the pages for the device you are wanting to configure

Menu-Certificate.svg

Certificates

First: Create the required 'CA' and 'Server' Certificates, and upload them to your FireBrick. (We have some tools available to make this a little easier)

Menu-FireBrick.svg

FireBrick config

Second: Upload the Configure the FireBrick with IKE, EAP Users, and roaming pools of addresses! (easier than it sounds!)

Third: Configure your device:

Menu-Apple.svg

iPhone & iPad iOS8

Creating a VPN profile for Apple iPhones and Apple iPads to connect to your FireBrick

Menu-Apple.svg

iPhone & iPad iOS9

Creating a VPN connection for Apple iPhones and Apple iPads running os 9 to connect to your FireBrick

Menu-Apple.svg

Apple Desktops & Laptops

Using Strongswan on Apple OS X computers, eg Macbook laptops etc to connect to your FireBrick

Menu-Android.svg

Android

Using Strongswan on Android phones and tablets to connect to your FireBrick

Menu-Windows.svg

Windows 7

Using the built in VPN features of Windows 7 to connect to your FireBrick

Menu-Windows.svg

Windows 10

Using the built in VPN features of Windows 10 to connect to your FireBrick

Menu-swan.svg

strongSwan (Debian et al)

Using strongSwan on Debain (or other distros) to connect to your FireBrick