Category:Incoming L2TP: Difference between revisions
 
There are two reasons to use L2TP to connect in to AAISP:
#As a back upbackup for your existing AAISP circuit in the evenevent of a fault, using L2TP you can use another ISP to connect in to AAISP and have your normal IP addresses etc whilst your AAISP connection is fixed. Ask staff to set this up.
*#Logging in over L2TP using your DSL credentials (ie xxx@a.1) from a different ISP you will then have your normal IP addresses etc whilst your AAISP connection is being fixed.
#Connect in to AAISP over a third-party internet connection. This gives you your an AAISP IPv4 address and an IPv6 block. There are more reasons and information on http://aa.net.uk/broadband-l2tp.html
 
Retrieved from ‘http://support.aa.net.uk/Category:Incoming_L2TP’