Category:Incoming L2TP

From AAISP Support Site

L2TP from Customers to AAISP

This is used to connect in to AAISP over a third-party internet connection. This gives you your usual AAISP IP (4 and 6) blocks and access to the internet as if you were conencted via a normal DSL circuit.

  • Hostname: AAISP
  • Endopint: l2tp.aa.net.uk
  • Username & Password as supplied
  • Plain L2TP without any IPsec
  • MSCHAPv2 authentication

MTU

You may have to set a lower MTU to accommodate the host ISP, possible as low as 1462 (or lower for some ISPs). In theory fragments will work to allow 1500 MTU on our service, but fragments are inefficient, and if everyone sends fragmented packets that could degrade the service.

Some Notes from customers setting up L2TP IN to AAISP:

Menu-FireBrick.svg

L2TP from FireBrick

Creating a L2TP connection from a FireBrick to AAISP)

Menu-Apple.svg

L2TP from OSX

Creating a L2TP connection from Apple OSX to AAISP

Menu-Windows.svg

L2TP from Windows

Creating a L2TP connection from Windows to AAISP

Menu-Linux.svg

L2TP from Linux

Creating a L2TP connection from Linux to AAISP

Menu-Routerboard.svg

L2TP from Routerboard

Creating a L2TP connection from Routerboard to AAISP

Menu-OpenWRT.svg

L2TP from OpenWRT

Creating a L2TP connection from OpenWRT to AAISP

Menu-Cisco.svg

L2TP from Cisco

Creating a L2TP connection from Cisco to AAISP

Menu-router.svg

L2TP from Other Routers

Creating a L2TP connection from other routers to AAISP