This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

Back up to the A&A Routers Page

Difference between revisions of "Category:Technicolor DGA0122"

From AAISP Support Site
Jump to navigation Jump to search
[quality revision][quality revision]
m
Line 7: Line 7:
   
   
  +
==Information==
 
   
 
[[File:DGA0122-rear.png|200px|thumb|Technicolor DGA0122 ports]]
 
[[File:DGA0122-rear.png|200px|thumb|Technicolor DGA0122 ports]]
Line 13: Line 13:
 
[[File:Rear-Drawing.png|200px|thumb|Ports]]
 
[[File:Rear-Drawing.png|200px|thumb|Ports]]
 
[[File:DGA0122-inside.png|200px|thumb|DGA0122 Inside]]
 
[[File:DGA0122-inside.png|200px|thumb|DGA0122 Inside]]
 
   
 
==Basic Specs==
 
==Basic Specs==

Revision as of 13:59, 5 January 2021


These pages are about the DGA0122 and the DWA0120. These two routers are similar, the main difference being that the DGA0122 does not have the analogue phone ports for VoIP.

DGA0122 and DWA0120

AAISP started selling the DGA0122 in December 2020, but supply problems (Due to Brexit) has meant a lack of stock. As of January 2021 AAISP have some stock of DWA0120 which are similar, so rather than having separate pages for the two models, we're combining the information for both here.



Technicolor DGA0122 ports
Technicolor DGA0122
Ports
DGA0122 Inside

Basic Specs

  • 4x 10/100M/1,000M ports.
  • Modem supports VDSL (FTTC) and ADSL/ADSL2+ (Not G.Fast)
  • WiFi is:
    • 2.4GHz WiFi-4, (2x2) IEEE 802.11n
    • 5GHz, WiFi-5, (3x3) IEEE 802.11ac
  • 2 FXS ports, for connecting an analogue phone to a VoIP account

User information

Suitable for:

  • ADSL1, ADSL2+
  • VDSL (FTTC)
  • G.Fast - using the Ethernet WAN port connected to an existing G.FAST modem
  • FTTP, FTTPoD - using the Ethernet WAN port to the fibre termination 'modem'

Factory Default Admin Username/Password

Default/Factory Password
IP: 192.168.1.1 (will change once configured if you have a block of IPv4 addresses)
Username: admin (or engineer for some superpowers)
Password: Before configured it will be as stated on the rear panel. Once configured it will be the one printed on the A&A card.
WiFi Password: Before configured it will be as stated on the rear panel as 'ACCESS KEY'. Once configured it will be the one printed on the A&A card.


Bugs & workarounds

We've identified a couple of bugs and have listed them here:

Media in category "Technicolor DGA0122"

The following 9 files are in this category, out of 9 total.