Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

Category:Technicolor DGA0122: Difference between revisions

m
(24 intermediate revisions by 3 users not shown)
__NOTOC__<indicator name="Front">[[File:Menu-B10C.svg|link=:Category:AA_Routers|30px|Back up to the A&A Routers Page]]</indicator>
 
[[File:DGA0122-front.jpg|200px|thumb|Technicolor DGA0122]]
These pages are about the DGA0122 and the DWA0120. These two routers are similar, the main difference being that the DGA0122 does not have the analogue phone ports for VoIP.
[[File:DGA0122-rear.png|200px|thumb|Technicolor DGA0122 ports]]
[[File:DGA0122DWA0120-insiderear.png|200px|thumb|DGA0122Technicolor InsideDWA0120 ports]]
[[File:Rear-Drawing.png|200px|thumb|DGA0122 Ports]]
[[File:DWA0120-ports.png|200px|thumb|DWA0120 Ports]]
[[File:DGA0122-inside.png|200px|thumb|DGA0122 Inside]]
[[File:Technicolor-serial-label.jpg|200px|thumb|Example default serial sticker]]
 
These pages are about the DGA0122 and the DWA0120. These two routers are similar, the main difference being that the DGA0122DWA0120 does not have the analogue phone ports for [[DGA0122_VoIP|VoIP]].
==DGA0122 and DWA0120==
AAISP started selling the DGA0122 in December 2020, but supply problems (Due to Brexit) has meant a lack of stock. As of January 2021 AAISP have some stock of DWA0120 which are similar, so rather than having separate pages for the two models, we're combining the information for both here.
 
==DGA0122 and DWA0120==
AAISP started selling the DGA0122 in December 2020, but. supplySupply problems (Due to Brexit) hasdid meantmean a lack of stock. As ofin January 2021 AAISPand havethe someDWA0120 stockwas ofsupplied DWA0120as an alternative. The whichtwo are similar, so rather than having separate pages for the two models, we're combining the information for both here.
 
'''Notable Differences:'''
 
*DGA0122 has two analogue telephone ports (ATA) for [[DGA0122_VoIP|VoIP support]]
 
[[File:DGA0122-rear.png|200px|thumb|Technicolor DGA0122 ports]]
[[File:DGA0122-front.jpg|200px|thumb|Technicolor DGA0122]]
[[File:Rear-Drawing.png|200px|thumb|Ports]]
[[File:DGA0122-inside.png|200px|thumb|DGA0122 Inside]]
 
==Basic Specs==
*4x 10/100M/1,000M ports.
*Modem supports VDSL (FTTC) and ADSL/ADSL2+ (Not G.Fast)
*WiFi is:
**2.4GHz WiFi-4, (2x2) IEEE 802.11n
**5GHz, WiFi-5, (3x3) IEEE 802.11ac
*2 FXS ports, (ATA) for connecting anstandard analogue phone devices to a [[DGA0122_VoIP|VoIP account]] '''DGA0122 only'''
 
==User information==
*ADSL1, ADSL2+
*VDSL (FTTC)
*''G.Fast'' - using theplug Ethernet WAN port connected '''to an existing G.FAST modem'''
*''FTTP, FTTPoD'' - using theplug Ethernet WAN port '''to the fibre termination 'modem'''' - suitable for 1G/s FTTP (see note on speeds)
 
'''Bridge mode:''' The automatic A&A configuration will not configure these routers as 'bridge'. If you want to use your own PPPoE router. In this case our basic ZyXEL is a better choice, or you can configure it manually: https://support.aa.net.uk/DGA0122_Bridge_Mode
==Factory Default Admin Username/Password==
 
{|class="wikitable"
===Speeds===
!colspan="3"|Default/Factory Password
This router can be used with faster FTTP circuits, eg up to 1Gb/s. Throughput on wifi will be limited to much lower speeds, but devices connected using wired connections should see around 950 Mbps when using our speed tester.
 
==Admin and WiFi passwords==
We ship the router with a basic configuration which is just enough to get the router to log in to us and fetch its full configuration for your line. There are settings on the control pane which can set the SSID, passwords etc, but until the router has been sent its full configuration it is in an 'unconfigured' state.
 
{|class="wikitable" style="text-align:center;
!
!As shipped / unconfigured
!Once configured
|-
!IP:
|192.168.1.1
|colspan="2"|192.168.1.1 (will change once configured if you have a block of IPv4 addresses)
|192.168.1.1 or your public block
|-
!Username:
|colspan="2" |admin (or engineer for some superpowers)
|-
!Password:
|Before configured it will berowspan="3"| as stated on the rear panel. Once configured it will be the one printed on the A&A card.
|rowspan="3"| as printed on the A&A card
|-
!Wifi Name:
!WiFi Password:
|-
|Before configured it will be as stated on the rear panel as 'ACCESS KEY'. Once configured it will be the one printed on the A&A card.
!WiFi Password:
|}
 
 
==Bugs & workarounds==
Sadly, CPE has always had some quirks or bugs. We've identified a couple of bugsproblems with the DGA0122 and have listed them here:
*[[DGA0122_Public_IPs|Unable to set or change the LAN address when using public IPs]]
*[[DGA0122_CQM_Graphs_Show_Latency|CQM graphs show latency spikes]]
*[[DGA0122_No_IPv6|IPv6 seemingly enabled, but not actually working]]
 
 
[[Category:AA Routers]]
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,264

edits