Category:Technicolor DGA4134: Difference between revisions

Category:Technicolor DGA4134 (view source)

Revision as of 14:09, 6 January 2022

342 bytes added , 6 January 2022

m

no edit summary

AA-Andrew

autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators

12,266

edits

Revision as of 09:46, 14 October 2021 (view source) AA-Andrew (talk \| contribs) mNo edit summary ← Older edit		Revision as of 14:09, 6 January 2022 (view source) AA-Andrew (talk \| contribs) mNo edit summary Newer edit →
(15 intermediate revisions by the same user not shown)
[[File:DGA4134.png\|thumb\|DGA4134]] [[File:DGA-DGA4134-angle.png\|thumb\|Ports]] [[File:DGA4134-rear.png\|thumb\|Rear]] [[File:DGA4134-front.png\|thumb\|Front]] These pages are about the Technicolor DGA4134. . ==~~DGA0122 and~~Technicolor DGA4134==▼ This router was introduced as a stop-gap for the DGA0122 in October 2021 due to supply shortages with the DGA0122. The DGA4134 and the DGA0122 are very similar. They look physically different, but the user interface, and physical ports are very similar. The DGA4134 has WiFi 6 though. Some of the support pages for the DGA0122 are also relevant to the DGA4134. ▲==DGA0122 and DGA4134== AAISP started selling the DGA0122 in December 2020. Supply problems (Due to Brexit) did mean a lack of stock in January 2021 and the DWA0120 was supplied as an alternative. The two are similar, so rather than having separate pages for the two models, we're combining the information for both here. Works well with the 'Technicolor OWA0131 WiFI Extender'. ==Basic Specs== 4x 10/100M/~~1,000M~~1G LAN ports. 1x 1 GE WAN port Modem supports VDSL (FTTC) and ADSL/ADSL2+ (Not G.Fast) WiFi is: 2.4GHz ~~WiFi-4,~~ (2x2) Wi-Fi 6 (IEEE 802.~~11n~~11ax) 5GHz~~, WiFi-5,~~ (~~3x3~~4x4) Wi-Fi 6 (IEEE 802.~~11ac~~11ax) 2 FXS ports, for connecting an analogue phone to a [[DGA0122_VoIP\|VoIP account]] ~~'''DGA0122 only'''~~ ==User information== Spec sheet: [[File:DGA4134-specsheet.pdf]] (Provided by ZyXEL, details may vary from the actual product!) A&A Quick Start sheet: ~~TBC~~[[File:DGA4134_Quick_Start.pdf]] ==Suitable for:== ADSL1, ADSL2+ VDSL (FTTC) ''G.Fast'' - using the red Ethernet WAN port connected '''to an existing G.FAST modem''' *''FTTP, FTTPoD'' - using the red Ethernet WAN port '''to the fibre termination 'modem'''' '''Bridge mode:''' The automatic A&A configuration will not configure these routers as 'bridge'. If you want to use your own PPPoE router. In this case our basic ZyXEL is a better choice, or you can configure it manually: https://support.aa.net.uk/DGA0122_Bridge_Mode