Back up to the A&A Routers Page

Difference between revisions of "Category:ZyXEL VMG1312-B10A"

From AAISP Support Site
Jump to: navigation, search
[quality revision][quality revision]
(clean up)
m (Supervisor password)
 
Line 46: Line 46:
 
|zyad1234
 
|zyad1234
 
|}
 
|}
 +
 +
Supervisor password:
 +
 +
When configured by AAISP, the supervisor password will be the same as the admin password. Logging in as ''supervisor'' enables more commands, including the ''sh'' command to get a root shell prompt.
  
 
=GPL OSS=
 
=GPL OSS=

Latest revision as of 16:02, 31 July 2019


ZyXELvmg1312-B10A.png

Summary

The ZyXEL VMG1312-B10A) is an all-in-one ADSL/VDSL router with WiFi and 4 network ports. AAISP started trialling these in February 2015 and from mid-May 2015 to Summer 2017. This is no longer the default router.

Basic Specs:

  • 4x 10/100M ports.
  • Modem supports VDSL (FTTC) and ADSL/ADSL2.
  • WiFi is 2.4 GHz, 802.11 b/g/n
  • Broadcom 63168 chipset

Further Documents:

The user guide from ZyXEL is very good.

Suitable for

  • ADSL1
  • ADSL2
  • ADSL2+
  • VDSL2 (FTTC) as an ethernet router plugged in to a VDSL modem (no longer a common setup, as Openreach no longer provide VDSL modems)
  • VDSL2 (FTTC) or ADSL as a bridging modem to a third-party PPPoE router (e.g. FireBrick). (Currently with reduced MTU)
  • FTTP using an ethernet WAN port doing PPPoE.

Factory Default Admin Username/Password

Note: An AAISP-configured router will have a different username and password.

Default/Factory Password
IP: 192.168.1.1
Username: admin supervisor
Password: 1234 zyad1234

Supervisor password:

When configured by AAISP, the supervisor password will be the same as the admin password. Logging in as supervisor enables more commands, including the sh command to get a root shell prompt.

GPL OSS

The product does contain open source software under the GPL. We have some of the software on the VMG1312: Software page. A copy of the software should be available by contacting ZyXEL:

MTU 1508

An independent developer, unconnected with AA, has produced a custom build based on the open-source sourcecode from ZyXEL which offers MTU 1500+8=1508 so full IP 1500 byte packets can be sent and received. Support for multiple telnet instances is also another benefit. AA is not associated with this development, cannot guarantee its quality nor be responsible for any problems or damage resulting from its use. AA does not recommend the use of this code and has not reviewed it. You must understand that use is at your own risk. Source code can be inspected and you should do so and build it yourself. As this is a third-party development, do not ask tech support about this. Discussion and details can be found on the forum.kitz.co.uk web site.

More Information

See below for further pages on the ZyXEL VMG1312 router...