Category:ZyXEL VMG1312 B10D: Difference between revisions

From AAISP Support Site
(add 1500 byte mtu info)
(Undo revision 12655 by Aa-jamie (talk) - 1500 confirmed to be not working on them. GRR.)
Line 45: Line 45:
|1234
|1234
|}
|}

==1500 MTU==
Units configured before 2017-09-22 will have been served a configuration limiting the maximum MTU in bridge mode at 1492 in error.

For units configured in bridge mode before this date, a full reset of the ZyXEL is required in order to attain 1500 byte MTU on the bridged interface.

This can be accomplished by holding the reset button down with a paperclip or other pointy object for approximately 10 seconds, until the LED goes red.

This will cause the router to reprovision, and download the correct configurations from our TR-069 server.


[[Category:AA Routers]]
[[Category:AA Routers]]

Revision as of 16:59, 7 November 2017


The ZyXEL VMG1312-B10D is the successor to the VMG1312-B10A. It is the default router supplied by AAISP from the summer of 2017.

Vmg1312-b10d.png
Menu-configure.svg

Quick Start

Guide with how to plug in and what the LEDs mean

Menu-document.svg

Further Documents

Manuals and other documentation for the router

Menu-cog.svg

Settings & Configuration

Information about how A&A configure the router and what settings are available to customers

Menu-floppy.svg

Software

Software information and downloads

Summary

The ZyXEL B10D (VMG1312-B10D) is an all-in-one ADSL/VDSL router with WiFi and 4 network ports. AAISP started supplying these in July 2017, these are now the default router.

Basic Specs:

  • 4x 10/100M ports.
  • Modem supports VDSL (FTTC) and ADSL/ADSL2.
  • WiFi is 2.4GHz, 802.11 b/g/n
  • Broadcom chipset
  • Baby jumbo frame support, therefore supporting 1500 byte MTU

Suitable for:

  • ADSL1
  • ADSL2
  • VDSL (FTTC) as an ethernet router plugged in to a VDSL modem (no longer a common setup, as Openreach no longer provide VDSL modems)
  • VDSL (FTTC) or ADSL as a bridging modem to a third-party PPPoE router (e.g. FireBrick). (with baby jumbo frame support, therefore supporting 1500 byte MTU)
  • FTTP using an ethernet WAN port doing PPPoE.


Factory Default Admin Username/Password

Note: An AAISP configured router will have a different username and password.

Default/Factory Password
IP: 192.168.1.1
Username: admin
Password: 1234



Subcategories

This category has only the following subcategory.

Media in category 'ZyXEL VMG1312 B10D'

The following 3 files are in this category, out of 3 total.