View source for Category:ZyXEL VMG3925 B10B

__NOTOC__<indicator name="Front">[[File:Menu-B10D.svg|link=:Category:AA_Routers|30px|Back up to the A&A Routers Page]]</indicator>

The ZyXEL VMG3925-B10B (B10B for short)  is the elder sibling of the VMG1312 - it benefits from having gigabit ethernet ports and dual-band wifi.


<div class="AAMenuRow">
{{AAMenu|img=menu-configure.svg|link=B10B_Quick_Start_Guide|title=Quick Start|text=Guide with how to plug in and what the LEDs mean}}
{{AAMenu|img=Menu-document.svg|link=B10B_Documents|title=Further Documents|text=Manuals and other documentation for the router}}
{{AAMenu|img=Menu-cog.svg|link=:Category:B10B Settings & Configuration|title=Settings  & Configuration|text=Information about how A&A configure the router and what settings are available to customers}}
{{AAMenu|img=Menu-floppy.svg|link=:B10B Software|title=Software|text=Software information and downloads}}

</div>

=Summary=
The ZyXEL B10B (VMG3925-B10B) is an all-in-one ADSL/VDSL router with dual band, 2.4G and 5G WiFi,  4 gigabit network ports and separate WAN ethernet port. AAISP started supplying these in April 2018

'''Basic Specs:'''
*4x 10/100M/1000M ports.
*Modem supports VDSL (FTTC) and ADSL/ADSL2.
*WiFi is 2.4GHz and 5Ghz, 802.11 b/g/n/ac
*MTU 1500 when in bridge mode not possible yet, but we are working with ZyXEL on this. (2018-03)

==Suitable for:==
*ADSL1
*ADSL2
*VDSL (FTTC) as an ethernet router plugged in to a VDSL modem (no longer a common setup, as Openreach no longer provide VDSL modems)
*VDSL (FTTC) or ADSL as a bridging modem to a third-party PPPoE router (e.g. FireBrick). <del>(with baby jumbo frame support, therefore supporting 1500 byte MTU)</del>
*FTTP using an ethernet WAN port doing PPPoE.


==Factory Default Admin Username/Password==
Note: An AAISP configured router will have a different username and password.
{|class="wikitable"
!colspan="3"|Default/Factory Password
|-
!IP: 
|colspan="2"|192.168.1.1
|-
!Username: 
|admin
|-
!Password: 
|1234
|}

Supervisor password:

The B10B has an autogenerated supervisor password (hashed from the serial number) - however you can read /etc/passwd from the device as the admin user via SSH - you'll need to crack the hash (eg with hashcat), the password will be 8 characters long using characters 0-9,a-f (lower case)

[[Category:AA Routers]]



__NOTOC__