Category:ZyXEL VMG3925 B10B: Difference between revisions

From AAISP Support Site
Line 16: Line 16:


[[File:VMG3925-B10B-Large.png|300px|thumb|ZyXEL VMG-3925-B10B]]
[[File:VMG3925-B10B-Large.png|300px|thumb|ZyXEL VMG-3925-B10B]]
[[File:VMG3925-B10B-WallMount.png|300px|thumb|Wall mount]]
[[File:VMG3925-B10B-WallMount.png|300px|thumb|Stand, can also be wall mounted]]


'''Basic Specs:'''
'''Basic Specs:'''

Revision as of 09:40, 12 March 2018


The ZyXEL VMG3925-B10B (B10B for short) is the elder sibling of the VMG1312 - it benefits from having gigabit ethernet ports and dual-band wifi.


Menu-configure.svg

Quick Start

Guide with how to plug in and what the LEDs mean

Menu-document.svg

Further Documents

Manuals and other documentation for the router

Menu-cog.svg

Settings & Configuration

Information about how A&A configure the router and what settings are available to customers

Menu-floppy.svg

Software

Software information and downloads

Summary

The ZyXEL B10B (VMG3925-B10B) is an all-in-one ADSL/VDSL router with dual band, 2.4G and 5G WiFi, 4 gigabit network ports and separate WAN ethernet port. AAISP started supplying these in April 2018

ZyXEL VMG-3925-B10B
Stand, can also be wall mounted

Basic Specs:

  • 4x 10/100M/1000M ports.
  • Modem supports VDSL (FTTC) and ADSL/ADSL2.
  • WiFi is 2.4GHz and 5Ghz, 802.11b/g/n, 802.11a/n/ac
  • MTU 1500 when in bridge mode not possible yet, but we are working with ZyXEL on this. (2018-03)

Suitable for:

  • ADSL1
  • ADSL2
  • VDSL (FTTC)
  • VDSL (FTTC) as an ethernet router plugged in to a VDSL modem (no longer a common setup, as Openreach no longer provide VDSL modems)
  • VDSL (FTTC) or ADSL as a bridging modem to a third-party PPPoE router (e.g. FireBrick).
  • FTTP using the ethernet WAN port doing PPPoE.


Factory Default Admin Username/Password

Note: An AAISP configured router will have a different username and password.

Default/Factory Password
IP: 192.168.1.1
Username: admin
Password: 1234

Supervisor password:

The B10B has an autogenerated supervisor password (hashed from the serial number) - however you can read /etc/passwd from the device as the admin user via SSH - you'll need to crack the hash (eg with hashcat), the password will be 8 characters long using characters 0-9,a-f (lower case)



Subcategories

This category has only the following subcategory.

Pages in category 'ZyXEL VMG3925 B10B'

The following 6 pages are in this category, out of 6 total.

Media in category 'ZyXEL VMG3925 B10B'

This category contains only the following file.