Category:ZyXEL VMG3925 B10B

From AAISP Support Site
Revision as of 20:14, 9 March 2018 by AA-Andrew (talk | contribs) (Created page with "__NOTOC__<indicator name="Front">link=:Category:AA_Routers|30px|Back up to the A&A Routers Page</indicator> The ZyXEL VMG3925-B10B (B10B for short) is...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


The ZyXEL VMG3925-B10B (B10B for short) is the elder sibling of the VMG1312 - it benefits from having gigabit ethernet ports and dual-band wifi.

Vmg1312-b10d.png
Menu-configure.svg

Quick Start

Guide with how to plug in and what the LEDs mean

Menu-document.svg

Further Documents

Manuals and other documentation for the router

Menu-cog.svg

Settings & Configuration

Information about how A&A configure the router and what settings are available to customers

Menu-floppy.svg

Software

Software information and downloads

Summary

The ZyXEL B10B (VMG3925-B10B) is an all-in-one ADSL/VDSL router with dual band, 2.4G and 5G WiFi, 4 gigabit network ports and separate WAN ethernet port. AAISP started supplying these in April 2018

Basic Specs:

  • 4x 10/100M/1000M ports.
  • Modem supports VDSL (FTTC) and ADSL/ADSL2.
  • WiFi is 2.4GHz and 5Ghz, 802.11 b/g/n/ac
  • MTU 1500 when in bridge mode not possible yet, but we are working with ZyXEL on this. (2018-03)

Suitable for:

  • ADSL1
  • ADSL2
  • VDSL (FTTC) as an ethernet router plugged in to a VDSL modem (no longer a common setup, as Openreach no longer provide VDSL modems)
  • VDSL (FTTC) or ADSL as a bridging modem to a third-party PPPoE router (e.g. FireBrick). (with baby jumbo frame support, therefore supporting 1500 byte MTU)
  • FTTP using an ethernet WAN port doing PPPoE.


Factory Default Admin Username/Password

Note: An AAISP configured router will have a different username and password.

Default/Factory Password
IP: 192.168.1.1
Username: admin
Password: 1234

Supervisor password:

The B10B has an autogenerated supervisor password (hashed from the serial number) - however you can read /etc/passwd from the device as the admin user via SSH - you'll need to crack the hash (eg with hashcat), the password will be 8 characters long using characters 0-9,a-f (lower case)



Subcategories

This category has only the following subcategory.

Pages in category 'ZyXEL VMG3925 B10B'

The following 6 pages are in this category, out of 6 total.

Media in category 'ZyXEL VMG3925 B10B'

This category contains only the following file.