DGA0122 VoIP

Back up to the Technicolor_DGA0122 Page
From AAISP Support Site
Revision as of 12:48, 20 August 2021 by AA-Andrew (talk | contribs) (Created page with "<indicator name="Front">link=:Category:Technicolor_DGA0122|30px|Back up to the Technicolor_DGA0122 Page</indicator> Category:Technicolor_DGA0122 Th...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


These are steps to set up the Technicolor to registrar to an A&A VoIP service and to use the analogue phone ports on the router for calls.

  1. Log in to the router
  2. Click the 'off' switch in the Telephony box to 'On'
  3. Click the configure 'cog' in the Telephony box.
  4. Click the Edit icon on the right had side for the sample configuration
    1. Set Primary Registrar to: voiceless.aa.net.uk
    2. Set Primary proxy to: voiceless.aa.net.uk
  5. Click the 'Phone Numbers' tab at the top
    1. For 'sip_profile_0':
      1. Click 'off' to enable it.
      2. Set username to your phone number, eg +44123456789
      3. Set password yo your SIP password
      4. Set DisplayName if you wish
      5. Click Save

The number should then show as registered: