Revision as of 13:59, 16 February 2011 (view source) Nickshore (talk \| contribs) (Created page with "'''Draft in progress ..... ''' Configuring your etch host then requires you just to edit /etc/network/interfaces and add the following stanza at the end: auto 6in4 iface 6...")		Revision as of 14:30, 16 February 2011 (view source) Nickshore (talk \| contribs) No edit summary Newer edit →
After that just type "ifup 6in4" (as root) and your link should be up. This could be it !! : auto 6in4 iface 6in4 inet6 v4tunnel address 2001:8b0:7:feed::1 local <ppp0 IPv4 IP> endpoint 81.187.81.6 ttl 64

Debian IPv6 Tunnel Config (view source)