Debian IPv6 Tunnel Config

From AAISP Support Site
Revision as of 10:30, 31 October 2012 by AA-Andrew (talk | contribs)

Draft in progress .....


Configuring your etch host then requires you just to edit /etc/network/interfaces and add the following stanza at the end:


remembering to change the XXXX to whatever value you've been allocated.

After that just type "ifup 6in4" (as root) and your link should be up.


This could be it !! :

auto 6in4
iface 6in4 inet6 v4tunnel
    address 2001:8b0:XXXX::1
    netmask 48
    endpoint 81.187.81.6
    gateway ::81.187.81.6