Debian IPv6 Tunnel Config

From AAISP Support Site
Revision as of 13:59, 16 February 2011 by Nickshore (talk | contribs) (Created page with "'''Draft in progress ..... ''' Configuring your etch host then requires you just to edit /etc/network/interfaces and add the following stanza at the end: auto 6in4 iface 6...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Draft in progress .....


Configuring your etch host then requires you just to edit /etc/network/interfaces and add the following stanza at the end:

 auto 6in4
 iface 6in4 inet6 v4tunnel
       address 2001:08B0:XXXX:0001::1
       netmask 124
       endpoint 81.187.81.6
       ttl 64
       up ip link set mtu 1280 dev 6in4
       up ip route add default via 2001:08B0:XXXX:0001::2 dev 6in4

remembering to change the XXXX to whatever value you've been allocated.

After that just type "ifup 6in4" (as root) and your link should be up.