Debian IPv6 Tunnel Config

From AAISP Support Site
Revision as of 14:33, 16 February 2011 by Nickshore (talk | contribs)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Draft in progress .....


Configuring your etch host then requires you just to edit /etc/network/interfaces and add the following stanza at the end:


remembering to change the XXXX to whatever value you've been allocated.

After that just type "ifup 6in4" (as root) and your link should be up.


This could be it !! :

 auto 6in4
 iface 6in4 inet6 v4tunnel
   address 2001:8b0:XXXX::1      
   local <ppp0 IPv4 IP>     
   endpoint 81.187.81.6
   ttl 64
   up ip route add default  dev 6in4