FTTC Modem: Difference between revisions
SimonArlott (talk | contribs) No edit summary |
SimonArlott (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
[[Category:FTTC]][[Category: |
[[Category:FTTC]][[Category:Modem]][[Category:Configuring]] |
||
= Related Pages on the A&A Website: = |
= Related Pages on the A&A Website: = |
||
Revision as of 09:45, 6 February 2011
Related Pages on the A&A Website:
With FTTC, BT will supply and install a VDSL modem (the Active NTE in BT speak), You will then need a PPPoE device (router or software) to use the service.
- PPPoE Service Name = Blank
- PPPoE username = as supplied, eg x@a.1
- PPPoE password = as supplied
- MTU = 1500 (if your equipment can handle baby jumbo frames and RFC 4638), otherwise 1492
- Auth Protocol CHAP
FTTC Modem
Here is an image of a BT supplied FTTC modem
The modem is supplied by BT, if it develops a fault then AAISP can contact BT and report a fault.
If the sync light flashes, then there is no sync, and will probably need to be reported as a fault.