FireBrick 2700 Replace PSU: Difference between revisions

From AAISP Support Site
(Fleshed out)
(Some images)
Line 1: Line 1:
Sometimes, the PSU inside the FireBrick 2700 does fail. And you have to replace it...
Sometimes, the PSU inside the FireBrick 2700 does fail. And you have to replace it...


#: [[File:FB2700 Case with Top Screws.JPG|200px]]
# Remove all the screw from the top of the case
# Remove all the screw from the top of the case
#: [[File:FB2700 Case without Top Screws.JPG|200px]]
# Remove the lid
# Remove the lid
#: [[File:FB2700 Case with Top Removed.JPG|200px]]
# Flip the firebrick over and remove both the screws from the front of the case
# Flip the firebrick over and remove both the screws from the front of the case
# Remove the front fascia
# Remove the front fascia

Revision as of 10:55, 16 March 2018

Sometimes, the PSU inside the FireBrick 2700 does fail. And you have to replace it...

  1. FB2700 Case with Top Screws.JPG
  2. Remove all the screw from the top of the case
    FB2700 Case without Top Screws.JPG
  3. Remove the lid
    FB2700 Case with Top Removed.JPG
  4. Flip the firebrick over and remove both the screws from the front of the case
  5. Remove the front fascia
  6. Unplug the green power cable from the PCB
  7. Remove the old PSU
  8. Put the new PSU in it's position
  9. Connect the green power cable from the new PSU to the PCB
  10. Put the front fascia back in place and screw it in
  11. Put the top cover back on and replace all the screws