Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

FireBrick Bonding more than 3 lines: Difference between revisions

m
mNo edit summary
 
(4 intermediate revisions by 4 users not shown)
 
=Overview=
The FireBrick 2500/2700 hashave 4 ethernet ports, typicallythe 2900 has 4 plus an SFP which can be used with a Copper of fibre SFP to give an additional port. Typically one port will be for the LAN connection (for example - to the main office switch), and the rest for connections to the ADSL/FTTC modems.
 
As there are 4 ports are we restricted to only bonding up to 3 ADSL/FTTC lines? No.
 
The switch would be set up for 4 (or more) separate VLANs on the appropriate ports, and on the FireBrick, the <ppp .../> config would have VLAN="n".
 
 
=VLAN Switch Config=
Instructions on using a ZyXEL GS1900-8 switch: [[ZyXEL_GS1900ZyXEL GS1900-8]]
 
Below are some notes on setting up a HP ProCurve 1810G-8:
 
*Default IP is "192.168.2.10"
*Default Passwordusername: is blankadmin
*Default password: 1234
 
==Save Config==
 
[[File:1810G-8-VLAN1.png|border|500px]]
 
On some switches you may need to set the PVID accordingly - ie Port 1 = PVID 101, Port 2 = PVID 102 etc... This was needed on a PoE variant of a switch, but not on the non-PoE variant.
 
*SAVE CONFIG - otherwise you will learn the hard way
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,264

edits