FireBrick Bonding more than 3 lines: Difference between revisions

FireBrick Bonding more than 3 lines (view source)

282 bytes added , 22 May 2020

m

12,264

edits

Revision as of 04:16, 27 February 2020 (view source) CecilWard (talk \| contribs) m (→‎Overview: added FB2900) ← Older edit		Latest revision as of 08:31, 22 May 2020 (view source) AA-Andrew (talk \| contribs) m (→‎Overview)
(One intermediate revision by the same user not shown)
=Overview= The FireBrick 2500/2700~~/2900~~ ~~has~~have 4 ethernet ports, ~~typically~~the 2900 has 4 plus an SFP which can be used with a Copper of fibre SFP to give an additional port. Typically one port will be for the LAN connection (for example - to the main office switch), and the rest for connections to the ADSL/FTTC modems. As there are 4 ports are we restricted to only bonding up to 3 ADSL/FTTC lines? No. [[File:1810G-8-VLAN1.png\|border\|500px]] On some switches you may need to set the PVID accordingly - ie Port 1 = PVID 101, Port 2 = PVID 102 etc... This was needed on a PoE variant of a switch, but not on the non-PoE variant. *SAVE CONFIG - otherwise you will learn the hard way