Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

FireBrick Portmapping: Difference between revisions

Fixup syntax
mNo edit summary
(Fixup syntax)
 
[[File:Firebrick-portmap-ruleset.png|thumb|The Ruleset]]
 
<syntaxhighlight lang=xml>
<rule-set name="Port Mappings"
source-interface="pppoe"
targetsource-interface="selfpppoe"
notarget-match-actioninterface="continueself">
no-match-action="continue">
</rule-set>
</syntaxhighlight>
 
And then add a rule for RDP to this rule-set:
 
<syntaxhighlight lang=xml>
<rule name="Map RDP to server1"
target-port="3389"
set-target-ipport="192.168.1.1013389"
set-nattarget-ip="true192.168.1.101"
actionset-nat="accepttrue"/>
action="accept"/>
</syntaxhighlight>
 
You can add more requirements as needed, such as changing the port if needed, or adding source IPs so as to restrict access to known IPs. You can also use profiles to control access further.
 
If you have more port mappings then you can add more rule's as required, eg to add access to an internal web server you could map port 8080 to port 80 of the internal webserver:
 
[[File:Firebrick-portmap-rule.png|thumb|The rule]]
<syntaxhighlight lang=xml>
<rule name="Map 8080 to web server2"
target-port="8080"
set-target-ipport="192.168.1.1028080"
set-target-portip="80192.168.1.102"
set-nattarget-port="true80"
actionset-nat="accepttrue"/>
action="accept"/>
</syntaxhighlight>
 
You can then test this rule using the built in Firewall test diagnostic.
 
If you put in:
*source Source IP = anything you want
* Target IP = The FireBrick's IP
* Protocol = 17
* Target port = 3389
 
Then you should see it match your rule and change the target IP etc:
editor
698

edits