This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

Back up to the Tunnels Category

Difference between revisions of "FireBrick to Openswan Strongswan IPsec (Howto)"

From AAISP Support Site
Jump to navigation Jump to search
[quality revision][quality revision]
m
m
Line 34: Line 34:
 
Put the following in the FB at the other end:
 
Put the following in the FB at the other end:
 
<syntaxhighlight language="xml">
 
<syntaxhighlight language="xml">
<connection name="IPSec" peer-ips=CentOS.IP.Address" auth-method="Secret" secret="YourSecretHere" internal-ipv4="FireBrick.LAN.IP.Address/24" routes="CentOS.IP.Address" log="default"/>
+
<connection name="IPSec" peer-ips="CentOS.IP.Address" auth-method="Secret" secret="YourSecretHere" internal-ipv4="FireBrick.LAN.IP.Address/24" routes="CentOS.IP.Address" log="default"/>
 
</syntaxhighlight>
 
</syntaxhighlight>
   
Line 60: Line 60:
   
 
<syntaxhighlight language="xml">
 
<syntaxhighlight language="xml">
<connection name="IPSecTostrongSwan" peer-ips=strongSwan.IP" auth-method="Secret" secret="YourSecretHere" internal-ipv4="FireBrick.LAN.IP.Address/24" routes="strongSwan.IP" log="default"/>
+
<connection name="IPSecTostrongSwan" peer-ips="strongSwan.IP" auth-method="Secret" secret="YourSecretHere" internal-ipv4="FireBrick.LAN.IP.Address/24" routes="strongSwan.IP" log="default"/>
 
</syntaxhighlight>
 
</syntaxhighlight>
 
[[Category:FireBrick_Tunnels|IPv6 Tunnels]]
 
[[Category:FireBrick_Tunnels|IPv6 Tunnels]]

Revision as of 15:11, 30 June 2015

Linux (CentOS Openswan) Example Using IKE2 and Preshared keys

yum install openswan

(strongswan is much nicer, but not in yum on centos5. On centos6, use strongswan)

In /etc/ipsec.conf uncomment

include /etc/ipsec.d/*.conf


Put following two files in /etc/ipsec.d/ :

file: myFireBrick.conf:

 conn myFireBrick
        authby=secret
        auto=start
        ikev2=insist
        left=CentOS.IP.Address
        leftid=CentOS.IP.Address
        leftsubnet=CentOS.IP.Address/32
        right=FireBrick.IP.Address
        rightid=FireBrick.IP.Address
        rightsubnet=FireBrick.LAN.SUBNET/24

file: myFireBrick.secrets:

CentOS.IP.Address FireBrick.IP.Address : PSK "YourSecretHere"
chkconfig ipsec on
service ipsec start

Put the following in the FB at the other end:

 <connection name="IPSec" peer-ips="CentOS.IP.Address" auth-method="Secret" secret="YourSecretHere" internal-ipv4="FireBrick.LAN.IP.Address/24" routes="CentOS.IP.Address" log="default"/>

strongSwan

file: /etc/ipsec.conf

 conn myFireBrick
       authby=secret
       auto=start
       left=strongSwan.IP
       leftid=strongSwan.IP
       leftsubnet=strongSwan.IP
       right=FireBrick.IP
       rightid=FireBrick.IP
       rightsubnet=FireBrick.LAN.IP.Address/24
       lifetime=2m

file: /etc/ipsec.secrets

 strongSwan.IP FireBrick.IP : PSK "YourSecretHere"
 <connection name="IPSecTostrongSwan" peer-ips="strongSwan.IP" auth-method="Secret" secret="YourSecretHere" internal-ipv4="FireBrick.LAN.IP.Address/24" routes="strongSwan.IP" log="default"/>