General Router Settings

From AAISP Support Site
Revision as of 09:53, 6 May 2014 by AA-Andrew (talk | contribs)

Related Pages on the A&A Website:


These are the basic settings for configuring ADSL modems/routers for a connection to AAISP using a BT or a BE line. (more info in your Information Pack (available from sales if required).

Basic BT, TT and BE PPPoA Settings

These are the same settings as a TalkTalk line and Be PPPoA line (Installed after Dec 2010)

BT-Zyxel.png
  • Username (as given, eg xx@a.1)
  • Password (as given, can be changed on the Control Pages)
  • VPI = 0
  • VCI = 38
  • MTU = 1500
  • PPPoA
  • Mux = VC Mux
  • Line Type = Auto
  • WAN IP = 0.0.0.0 (Your fixed WAN IP will be assigned upon login)
  • DNS: 217.169.20.20 217.169.20.21 (2001:8b0::2020 and 2001:8b0::2021 for IPv6)

More Details on www.aaisp.net.uk/kb-broadband-router.html

Basic BE PPPoE Settings (Legacy/Old Connections)

This is for Be lines installed before December 2010, as lines after this will be PPPoA, and will have the same settings as a BT line, as above.

BE-Zyxel.png
  • Username (as given, eg yy@a.1)
  • Password (as given, can be changed on the Control Pages)
  • VPI = 0
  • VCI = 101
  • MTU = 1492
  • PPPoE
  • Mux = LLC
  • Line Type = Auto
  • WAN IP = 0.0.0.0 (Your fixed WAN IP will be assigned upon login)
  • DNS: 217.169.20.20 217.169.20.21 (2001:8b0::2020 and 2001:8b0::2021 for IPv6)

More Details on www.aaisp.net.uk/kb-broadband-bebt.html