Help Choosing A Router: Difference between revisions

Back up to the Routers Category
From AAISP Support Site
No edit summary
No edit summary
 
(25 intermediate revisions by 2 users not shown)
Line 20: Line 20:
!Specs
!Specs
!4 port, wifi, FTTC, ADSL, Bridge modem
!4 port, wifi, FTTC, ADSL, Bridge modem
!4 port, 2.4ghz and 5ghz wifi, FTTC, ADSL, Bridge modem, analogue phone compatible
!PPPoE Bridge Modem, ADSL
!4 Ethernet Ports, 1 SFP Port, fallback and line bonding, IPv4 & IPv6 firewalling, port mapping, and traffic shaping
!4 (5) port Ethernet Router/Firewall etc.
|-
|-
!Summary
!Summary
Line 37: Line 37:
*All-in-one unit
*All-in-one unit
|
|
*ADSL1, ADSL2+
*Use with a your own PPPoE router/firewall
*VDSL (FTTC)
*Can do full 1500 byte MTU over PPPoE, which the ZyXEL can't in bridge mode
*FTTP
*Good WiFI
*2 FXS ports, for connecting an analogue phone to a VoIP account
|
|
*Flexible and feature-packed router
*Flexible and feature-packed router
*Advanced features such as 3G fallback, bonding etc.
*Advanced features such as 4G fallback, bonding etc.
|-
|-
!Not so good points for:
!Not so good points for:
Line 51: Line 54:
|
|
Steeper learning curve, as you'd probably expect from a router of this level (but A&A can help support)
Steeper learning curve, as you'd probably expect from a router of this level (but A&A can help support)
|
*No WiFi capabilities
*Requires a separate access point connected for WiFi
|-align="center"
|-align="center"
!Configured by AAISP
!Configured by AAISP
Line 62: Line 68:
|[[File:tick.png|center]]
|[[File:tick.png|center]]
|[[File:tick.png|center]]
|[[File:tick.png|center]]
''Will require a Modem, such as the DLINK''
''Will require a Modem, such as the T20B or Vigor 130 (any ADSL Modem)''
|--align="center"
|-align="center"
!FTTC
!FTTC
|[[File:tick.png|center]]
|[[File:tick.png|center]]
|[[File:No.png|20px|center]]
|[[File:tick.png|center]]
|[[File:tick.png|center]]
|[[File:tick.png|center]]
''Will require a Modem, such as the T20B or Vigor 130 (any VDSL Modem)''
|-align="center"
|-align="center"
!Ethernet Service
!Ethernet Service
Line 78: Line 85:
|[[File:tick.png|center]]
|[[File:tick.png|center]]
|[[File:tick.png|center]]
|[[File:tick.png|center]]
''We prefer the DLINK as a bridge due to MTU limitations (they drop packets above 1504 bytes)''
''We prefer the T20B as a bridge as it would be overkill to use this router in that way!''
|[[File:tick.png|center]]
|[[File:tick.png|center]]
|-align="center"
|-
!Built in WiFi
!Built in WiFi
|[[File:tick.png|center]]
|[[File:tick.png|center]]
|[[File:No.png|20px|center]]
|[[File:tick.png|center]]
|[[File:No.png|20px|center]]
|[[File:No.png|20px|center]]
|-
|-
Line 98: Line 105:
!Notes
!Notes
![[ZyXEL- VMG1312-T20B|More Info on T20B]]
![[ZyXEL- VMG1312-T20B|More Info on T20B]]
![[Category:Technicolor DGA0122|More Info on T'color]]
![[Technicolor_DGA0122|More Info on T'color]]
![https://www.firebrick.co.uk/fb2900/ More Info on FB]
![https://www.firebrick.co.uk/fb2900/ More Info on FB]
|}
|}
Line 113: Line 120:
!colspan=2| Our Suggestion
!colspan=2| Our Suggestion
|-
|-
!I'm a home user, wanting wifi and wired connections for ADSL or FTTC, or just needing a VSDL modem for my own PPPoE router:
!I'm a home user, wanting wifi and wired connections for ADSL or FTTC, or just needing a modem for my own PPPoE router
|[[Image:ZyXELvmg1312.png|100px|link=:Category:ZyXEL_VMG1312]]
|[[Image:vmg1312-t20b.png|110px|link=:ZyXEL- VMG1312-T20B|center]]
|'''ZyXEL VMG 1312'''
|'''ZyXEL VMG1312-T20B'''
|-
|-
!I'm a home user, wanting wifi and wired connections for ADSL or FTTC, and I want dualband WiFi range for online high resolution gaming, video streaming and high resolution audio
!I have my own routerboard or similar router with ADSL
|[[File:DGA0122-rear.png|200px|link=Category:Technicolor DGA0122|center]]
|[[File:DSL 320B D1.png]]
|'''DLINK DSL 320B.'''
|'''Technicolor DGA0122'''

In bridge mode, your router can then talk PPPoE to it.
|-
|-
!I'd like to do bonding with ADSL/FTTC/FTTP
!I'd like to do bonding with ADSL/FTTC/FTTP
|[[File:FB2900.jpg|400px|link=:Category:FireBrick|center]]
|[[File:2700-small.png]]
|'''FireBrick 2700'''
|'''FireBrick 2900'''
Use alongside a DLINK modem if you have ADSL, or the ZyXEL 1312 if you have FTTC lines.
Use alongside a T20B or Vigor 130 (any compatible modem)
|}
|}

G.Fast and FTTP is a slightly different set-up. Please ask support for more info.


You can always use your own equipment, that's fine too!
You can always use your own equipment, that's fine too!

Latest revision as of 10:04, 8 June 2021


What would AAISP recommend as a router/Modem?

AAISP customers are free to use their own routers if they wish. This is a table of the routers/modems that AAISP sell, and their features:

ZyXEL VMG1312-T20B Technicolor DGA0122 FireBrick 2900
Vmg1312-t20b.png DGA0122-rear.png FB2900.jpg
Specs 4 port, wifi, FTTC, ADSL, Bridge modem 4 port, 2.4ghz and 5ghz wifi, FTTC, ADSL, Bridge modem, analogue phone compatible 4 Ethernet Ports, 1 SFP Port, fallback and line bonding, IPv4 & IPv6 firewalling, port mapping, and traffic shaping
Summary

(T20B for short!) A consumer grade router which ideal for home use or for small offices.

(T'Color for short!) Our higher specification standard router. If you want better range, you can use 2.4 GHz. If you need higher performance or speed, you can use the 5GHz band. The 5GHz band, has the potential to cut through network clutter and interference to maximize network performance.

(FB for short!) The FireBrick 2900 is a router, bonding box and traffic shaper. It can act as a SIP PBX, VPN tunnel endpoint and concentrator. Most commonly it is used as a general purpose network appliance in office environments, or for customers that would like to bond 2 or more circuits.

Ideal for:
  • Home use
  • Small office
  • All-in-one unit
  • ADSL1, ADSL2+
  • VDSL (FTTC)
  • FTTP
  • Good WiFI
  • 2 FXS ports, for connecting an analogue phone to a VoIP account
  • Flexible and feature-packed router
  • Advanced features such as 4G fallback, bonding etc.
Not so good points for:
  • FTTP
  • G.FAST
  • Plugging in to a Modem (there is no Ethernet WAN port)
  • WiFi is 2.4 GHz only

Steeper learning curve, as you'd probably expect from a router of this level (but A&A can help support)

  • No WiFi capabilities
  • Requires a separate access point connected for WiFi
Configured by AAISP
Tick.png
Tick.png
Tick.png

Sometimes an extra charge is applied

ADSL/ADSL2+
Tick.png
Tick.png
Tick.png

Will require a Modem, such as the T20B or Vigor 130 (any ADSL Modem)

FTTC
Tick.png
Tick.png
Tick.png

Will require a Modem, such as the T20B or Vigor 130 (any VDSL Modem)

Ethernet Service
No.png
No.png
Tick.png
Use with your own PPPoE router

(Bridge mode)

Tick.png
Tick.png

We prefer the T20B as a bridge as it would be overkill to use this router in that way!

Tick.png
Built in WiFi
Tick.png
Tick.png
No.png
Native IPv6
Tick.png
Tick.png
Tick.png
Built in FireWall
Tick.png
Tick.png
Tick.png
Notes More Info on T20B More Info on T'color More Info on FB



Typical Scenarios

Or, maybe these typical scenarios will help you decide:

Your Scenario Our Suggestion
I'm a home user, wanting wifi and wired connections for ADSL or FTTC, or just needing a modem for my own PPPoE router
Vmg1312-t20b.png
ZyXEL VMG1312-T20B
I'm a home user, wanting wifi and wired connections for ADSL or FTTC, and I want dualband WiFi range for online high resolution gaming, video streaming and high resolution audio
DGA0122-rear.png
Technicolor DGA0122
I'd like to do bonding with ADSL/FTTC/FTTP
FB2900.jpg
FireBrick 2900

Use alongside a T20B or Vigor 130 (any compatible modem)

G.Fast and FTTP is a slightly different set-up. Please ask support for more info.

You can always use your own equipment, that's fine too!