Home::1

From AAISP Support Site
Revision as of 12:58, 29 May 2014 by Farnz (talk | contribs)

The Home::1 tariff is an ideal tariff for home users who want a simple fixed-usage service from AAISP. More details as to what is offered and the pricing can be found on the main website:

Quota

The Home::1 has a quota amount per month, either 100GB, 200GB or 300GB.

How to Change the monthly quota

Please contact Sales.

How to view remaining Quota

It can be viewed from the control pages, and also by viewing our front page of our main web site from your Home::1 line, eg:

H1Quota.png


Quote Top Up Options

Home ::1 Quota setting on Control Pages
Action What happens when Quota reached How to top-up
Block You will be redirected to our portal From our portal you can purchase Topup
Slow The line will be limited in speed. (256Kb/s). Usage during this month will come out of next month's quota. You can topup from the Control Pages (see below)
Auto-bill When the quota is reached, the system will issue a 50GB topup and will invoice for it n/a (It's automatic)

Topup before it runs out

Topup button

If the topup option is set to Slow or Block, then when you have less than 50GB left a Topup button will be shown on the Control Page. Clicking this will add 50GB and will invoice for it.

Quota on Bonded Home::1 Lines

Quota is calculated per-line, but shared between all lines in a bonded set. There is a process called "balancing", which takes the total quota for the bonded set, and splits it equally between the lines in the set.

When your quota is reset at the beginning of each month, the balancing process runs; if you have 2 lines and 100GB quota, each line will get 50GB quota assigned.

Whenever a line in the set runs out of quota, balancing is run again to take quota from lines that haven't yet run out and pass it to the lines that have run out.

From a user's perspective, this means that you don't hit your "quota reached" action (block/slow/auto-bill) until you have completely run out of quota across your set of lines. However, there can be confusing states where (e.g.) you have a total of 25GB quota left, shown to you as line 1 having 20GB quota and line 2 having 5GB quota. Don't panic; when the line with 5GB quota runs out of quota completely, balancing will kick in and adjust the situation.

In our example case, if asymmetric speeds and/or per-line IPv6 routing means that you use 10GB on line 1, and 5GB on line 2, you'll hit the point where you have one line with 10GB quota and another line with 0GB quota. Balancing will detect this, and rearrange so that you have 5GB per line. If you then use 5GB on line 1 and 1 GB on line 2, balancing will kick in again, and give you 2GB per line. This will continue until you run out of quota, and your out-of-quota action (block/slow/auto-bill) will kick in.

If you apply a top-up before you run out of quota, this is only applied to one line. The expectation is that balancing will spread the top-up among your lines as needed.