Difference between revisions of "IPv6 Configuration"

From AAISP Support Site
Jump to: navigation, search
[unchecked revision][unchecked revision]
Line 1: Line 1:
=Related Pages on the A&A Website:=
+
= Related Pages on the A&A Website: =
  +
 
*[http://www.aaisp.net.uk/kb-broadband-ipv6.html www.aaisp.net.uk/kb-broadband-ipv6.html]
 
*[http://www.aaisp.net.uk/kb-broadband-ipv6.html www.aaisp.net.uk/kb-broadband-ipv6.html]
  +
== IPv6 over IP Tunnelled Connections ==
 
  +
== Useful Blog/HOWTO Entries ==
* [[Cisco IPv6 Tunnel Config]]
 
  +
* [[FreeBSD IPv6 Tunnel Config]]
 
  +
*[http://www.pitt-pladdy.com/blog/_20100123-184109%2B0000%20OpenWrt%20with%20native%20IPv6%20on%20DG834%20v2%20%28using%20AAISP%29/ Using OpenWRT as an IPv6 router]
See also the configuration examples on the IPv6 Knowledge-base page referenced above.
 
  +
*[http://wiki.openwrt.org/doc/howto/ipv6 Configuring OpenWRT for IPv6]
  +
  +
== Consumer CPE Equipment ==
  +
  +
The following equipment has been successfully used as an IPv6 Router for home use
  +
  +
*Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
  +
*Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)
  +
  +
== IPv6 over IP Tunnelled Connections ==
  +
  +
*[[Cisco IPv6 Tunnel Config]]
  +
*[[FreeBSD IPv6 Tunnel Config]]
  +
  +
See also the configuration examples on the IPv6 Knowledge-base page referenced above.
   
 
[[Category:IPv6]] [[Category:Configuring]]
 
[[Category:IPv6]] [[Category:Configuring]]

Revision as of 17:44, 8 December 2010

Related Pages on the A&A Website:

Useful Blog/HOWTO Entries

Consumer CPE Equipment

The following equipment has been successfully used as an IPv6 Router for home use

  • Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
  • Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)

IPv6 over IP Tunnelled Connections

See also the configuration examples on the IPv6 Knowledge-base page referenced above.