IPv6 Configuration: Difference between revisions

From AAISP Support Site
No edit summary
No edit summary
Line 1: Line 1:
=Related Pages on the A&A Website:=
= Related Pages on the A&A Website: =

*[http://www.aaisp.net.uk/kb-broadband-ipv6.html www.aaisp.net.uk/kb-broadband-ipv6.html]
*[http://www.aaisp.net.uk/kb-broadband-ipv6.html www.aaisp.net.uk/kb-broadband-ipv6.html]

== IPv6 over IP Tunnelled Connections ==
== Useful Blog/HOWTO Entries ==
* [[Cisco IPv6 Tunnel Config]]

* [[FreeBSD IPv6 Tunnel Config]]
*[http://www.pitt-pladdy.com/blog/_20100123-184109%2B0000%20OpenWrt%20with%20native%20IPv6%20on%20DG834%20v2%20%28using%20AAISP%29/ Using OpenWRT as an IPv6 router]
See also the configuration examples on the IPv6 Knowledge-base page referenced above.
*[http://wiki.openwrt.org/doc/howto/ipv6 Configuring OpenWRT for IPv6]

== Consumer CPE Equipment ==

The following equipment has been successfully used as an IPv6 Router for home use

*Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
*Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)

== IPv6 over IP Tunnelled Connections ==

*[[Cisco IPv6 Tunnel Config]]
*[[FreeBSD IPv6 Tunnel Config]]

See also the configuration examples on the IPv6 Knowledge-base page referenced above.


[[Category:IPv6]] [[Category:Configuring]]
[[Category:IPv6]] [[Category:Configuring]]

Revision as of 17:44, 8 December 2010

Related Pages on the A&A Website:

Useful Blog/HOWTO Entries

Consumer CPE Equipment

The following equipment has been successfully used as an IPv6 Router for home use

  • Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
  • Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)

IPv6 over IP Tunnelled Connections

See also the configuration examples on the IPv6 Knowledge-base page referenced above.