Difference between revisions of "IPv6 Configuration"

From AAISP Support Site
Jump to: navigation, search
(FireBrick 2500/2700)
(IPv6 over IP Tunnelled Connections)
Line 19: Line 19:
 
*[[Cisco IPv6 Tunnel Config]]
 
*[[Cisco IPv6 Tunnel Config]]
 
*[[FreeBSD IPv6 Tunnel Config]]
 
*[[FreeBSD IPv6 Tunnel Config]]
  +
*[[FireBrick 2700 v6 Tunnel]]
   
 
See also the configuration examples on the IPv6 Knowledge-base page referenced above.
 
See also the configuration examples on the IPv6 Knowledge-base page referenced above.

Revision as of 09:47, 10 January 2011

Related Pages on the A&A Website:

Useful Blog/HOWTO Entries

Consumer CPE Equipment

The following equipment has been successfully used as an IPv6 Router for home use

  • Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
  • Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)

IPv6 over IP Tunnelled Connections

See also the configuration examples on the IPv6 Knowledge-base page referenced above.

FireBrick 2500/2700

It's quite easy.... Assuming you have an IPv6 block allocated to your line on Clueless and you're using the FB for PPPoE, then all the FB config needs is:

  • An IPv6 address on the LAN subnet
  • ra="true" in the subnet