Difference between revisions of "IPv6 Configuration"

From AAISP Support Site
Jump to: navigation, search
m (Consumer CPE Equipment)
(Changed the subject to be more consumer friendly and added a search for hardware discussion page)
Line 8: Line 8:
 
*[http://wiki.openwrt.org/doc/howto/ipv6 Configuring OpenWRT for IPv6]
 
*[http://wiki.openwrt.org/doc/howto/ipv6 Configuring OpenWRT for IPv6]
   
== Consumer CPE Equipment ==
+
== IPv6 ready hardware ==
   
The following equipment has been successfully used as an IPv6 Router for home use
+
The following equipment has been successfully used as an IPv6 Router for home use. These are known as CPE or Customer Premises Equipment.
   
 
*Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
 
*Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
Line 16: Line 16:
 
*Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)
 
*Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)
 
*Our [[FireBrick 2700]] page has info on Native IPv6 config (also applies to 2500)
 
*Our [[FireBrick 2700]] page has info on Native IPv6 config (also applies to 2500)
  +
  +
The search for additional IPv6 CPE possibilities: [[IPv6CPESearch]]
   
 
== IPv6 over IP Tunnelled Connections ==
 
== IPv6 over IP Tunnelled Connections ==

Revision as of 02:12, 25 January 2011

Related Pages on the A&A Website:

Useful Blog/HOWTO Entries

IPv6 ready hardware

The following equipment has been successfully used as an IPv6 Router for home use. These are known as CPE or Customer Premises Equipment.

  • Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
  • Linksys NSLU2 running Debian Squeeze with a SpeedTouch USB ADSL modem Guide
  • Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)
  • Our FireBrick 2700 page has info on Native IPv6 config (also applies to 2500)

The search for additional IPv6 CPE possibilities: IPv6CPESearch

IPv6 over IP Tunnelled Connections

See also the configuration examples on the IPv6 Knowledge-base page referenced above.

FireBrick 2500/2700

It's quite easy.... Assuming you have an IPv6 block allocated to your line on Clueless and you're using the FB for PPPoE, then all the FB config needs is:

  • An IPv6 address on the LAN subnet
  • ra="true" in the subnet