Difference between revisions of "IPv6 Configuration"

From AAISP Support Site
Jump to: navigation, search
[unchecked revision][unchecked revision]
(IPv6 over IP Tunnelled Connections)
Line 23: Line 23:
   
 
[[Category:IPv6]] [[Category:Configuring]]
 
[[Category:IPv6]] [[Category:Configuring]]
  +
  +
==FireBrick 2500/2700==
  +
It's quite easy....
  +
Assuming you have an IPv6 block allocated to your line on Clueless and you're using the FB for PPPoE, then all the FB config needs is:
  +
An IPv6 address on the LAN subnet
  +
ra="true" in the subnet

Revision as of 10:16, 6 January 2011

Related Pages on the A&A Website:

Useful Blog/HOWTO Entries

Consumer CPE Equipment

The following equipment has been successfully used as an IPv6 Router for home use

  • Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
  • Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)

IPv6 over IP Tunnelled Connections

See also the configuration examples on the IPv6 Knowledge-base page referenced above.

FireBrick 2500/2700

It's quite easy.... Assuming you have an IPv6 block allocated to your line on Clueless and you're using the FB for PPPoE, then all the FB config needs is: An IPv6 address on the LAN subnet ra="true" in the subnet